Ensure you have read and fully understood the instruction manual and safety advice before using this product.
Only use this locker with certified gas bottles that are approved for the specific gas type and capacity.
Before installation or use, inspect the locker for any signs of damage, corrosion, or sharp edges; do not use if any damage is present.
Always check gas bottle valves and connection hoses for tightness, wear, and integrity before securing them inside the locker.
Ensure the locker is installed in a location that meets proper ventilation requirements—this unit must not be used in confined or unventilated spaces.
This locker must be vented in accordance with local safety regulations; under no circumstances should ventilation openings be blocked, covered, or restricted.
Do not store leaking, damaged, or unapproved gas bottles inside the locker.
Always vent the locker by opening the door and allowing air to circulate before handling or switching gas bottles.
Never use this product near open flames, sparks, or any source of heat or ignition. Maintain a minimum safe distance of 1 metre from such hazards.
When lifting gas bottles into or out of the locker, always use proper manual handling techniques and lift with both hands to reduce the risk of injury or bottle damage.
Keep the locker lid or door fully open during loading and unloading to avoid trapping hands or fingers and to ensure stable access.
Secure gas bottles properly within the locker using any provided internal restraints or brackets to prevent movement during transport or use.
Use protective gloves if handling the locker exposes you to rough or sharp surfaces, particularly during initial installation or first-time use.
Regularly inspect the locker’s interior and exterior surfaces for signs of corrosion, wear, or deterioration. Replace or repair the unit if safety is compromised.
Do not attempt to modify or alter the locker’s design, structure, or ventilation system. Unauthorised changes may compromise safety and invalidate any warranty or certification.
Maintain clear access to all vent openings and ensure they are free from dirt, insects, or obstructions that could impede airflow.
This product must be installed on a flat, stable surface to prevent tipping or shifting during use or transit.
Maximum weight of gas bottle stored should not exceed the specified 6-litre rating—overloading may result in structural failure or injury.
Do not use the locker for storing any substances other than appropriate gas bottles. It is not suitable for tools, flammable liquids, or general storage.
If any gas smell is detected near the locker, immediately cease use, ventilate the area, and contact a qualified technician to inspect the system before resuming use.
This product must be used only in accordance with local regulations for gas storage, particularly in marine, camping, or vehicle environments where specific rules apply.
Keep children and unauthorised persons away from the locker and its contents at all times.
Perform routine safety inspections of the locker, vent system, and gas connections at least monthly, or before each use if used intermittently.
Ensure that all components supplied with the locker are used as directed—do not omit fittings, seals, or other safety-critical parts during installation.
