Hydraulic Car Ramp

Instructions for assembling, installing, and using the T-Mech heavy duty hydraulic car ramps, designed to lift cars and trucks up to 3 tonnes in your workshop or garage. It includes safety advice, product specifications, and maintenance guidelines.

Product Information

Hydraulic Car Ramp

This T-Mech heavy duty set of car ramps are ideal to lift cars and trucks in your workshop or garage. Supplied as a pair these ramps have a combined capacity of 3000kg (3.0 Tonne). These car repair ramps have a sturdy and durable high-quality steel construction. Thanks to the compact design, they can be conveniently stored in limited space.

View product

Materials: Steel
Weight: 16.5kg/pc approximately
Colors: Blue
SKU: 211854

Safe Working Practice

Please read through the Safe Working Practice to ensure prevention of injury or damage to the device.

For safety, the use of this product shall not exceed the maximum load under the vehicle.
Do not abuse this product!
We do not accept liability for any damage or injury caused by not complying with the safety instructions.
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
WARNING! Trapping Danger – Although the vehicle lift movements are slow in operation, keep hands and limbs away from the steelwork during elevating and lowering.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip steel toe capped shoes.
Remove ill-fitting clothes. Remove ties, watches, rings, other loose jewellery.
Familiarise yourself with the applications, limitations, and potential hazards of the vehicle lift.
DO NOT use to achieve a task the vehicle lift was not designed to perform.
DO NOT allow untrained persons to assemble or use the vehicle hydraulic ramp.
DO NOT lift the vehicle with people inside.

Parts

Wheel Support: 1
Hydraulics: 1
Ramp: 1
Nut: 1
Safety Pin: 1
Hand Lever: 1
Screw: 1

1. Instructions
Before using the product please read the instructions carefully to avoid the risk of injury to persons and damage to the goods themselves.

For safety, this product is limited to use for vehicles of less than 5 tons.

Please drive the vehicle to a level road, park the vehicle. Place the ramp in the central position of the front wheel.

When using, the operator should have driving experience, novice drivers please use with caution.

Please make sure that the wheels are running in the middle of the ramp.

After the vehicle is parked to the ramp, please remember to pull the handbrake on, to avoid harm caused by any shaking of the vehicle.

We can place the retaining device on the rear wheels now to prevent the vehicle from moving backwards.

Do not use when the product is found to have damage, bending or any other factors that would affect safety.

You will need someone to guide you when using the ramp.

This product is suitable for the use of vehicles close to the angle greater than 17 degrees.
2. Maintenance
Regularly check the condition of the Hydraulic drive-on ramp for cracks and general product integrity.

Clean pollution of any kind on the Hydraulic drive-on ramp before each use, such as oil stains, etc.

Regularly check whether any screws are loose, and reinforce the screws before use.

monstershop.co.uk
Instructions by Monstershop Hydraulic Car Ramp
Monstershop / Hydraulic Car Ramp Instructions by monstershop Hydraulic Car Ramp Instructions for assembling, installing, and using the T-Mech heavy duty hydraulic car ramps, designed to lift cars and trucks up to 3 tonnes in your workshop or garage. It includes safety advice, product specifications, and maintenance guidelines. Product Information Hydraulic Car Ramp This T-Mech heavy duty set of car ramps are ideal to lift cars and trucks in your workshop or garage. Supplied as a pair these ramps have a combined capacity of 3000kg (3.0 Tonne). These car repair ramps have a sturdy and durable high-quality steel construction. Thanks to the compact design, they can be conveniently stored in limited space. View product Materials Steel Weight 16.5kg/pc approximately Colors Blue SKU 211854 Safe Working Practice Please read through the Safe Working Practice to ensure prevention of injury or damage to the device. For safety, the use of this product shall not exceed the maximum load under the vehicle. Do not abuse this product! We do not accept liability for any damage or injury caused by not complying with the safety instructions. WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment. WARNING! Trapping Danger – Although the vehicle lift movements are slow in operation, keep hands and limbs away from the steelwork during elevating and lowering. Keep the work area clean, uncluttered and ensure there is adequate lighting. Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip steel toe capped shoes. Remove ill-fitting clothes. Remove ties, watches, rings, other loose jewellery. Familiarise yourself with the applications, limitations, and potential hazards of the vehicle lift. DO NOT use to achieve a task the vehicle lift was not designed to perform. DO NOT allow untrained persons to assemble or use the vehicle hydraulic ramp. DO NOT lift the vehicle with people inside. Parts Wheel Support 1 Hydraulics 1 Ramp 1 Nut 1 Safety Pin 1 Hand Lever 1 Screw 1 1. Instructions Before using the product please read the instructions carefully to avoid the risk of injury to persons and damage to the goods themselves. For safety, this product is limited to use for vehicles of less than 5 tons. Please drive the vehicle to a level road, park the vehicle. Place the ramp in the central position of the front wheel. When using, the operator should have driving experience, novice drivers please use with caution. Please make sure that the wheels are running in the middle of the ramp. After the vehicle is parked to the ramp, please remember to pull the handbrake on, to avoid harm caused by any shaking of the vehicle. We can place the retaining device on the rear wheels now to prevent the vehicle from moving backwards. Do not use when the product is found to have damage, bending or any other factors that would affect safety. You will need someone to guide you when using the ramp. This product is suitable for the use of vehicles close to the angle greater than 17 degrees. 2. Maintenance Regularly check the condition of the Hydraulic drive-on ramp for cracks and general product integrity. Clean pollution of any kind on the Hydraulic drive-on ramp before each use, such as oil stains, etc. Regularly check whether any screws are loose, and reinforce the screws before use. Monstershop website Terms Privacy

Product Information

Hydraulic Car Ramp

Parts

1. Instructions

2. Maintenance