Mortar Board Stands

215677-215682

Product Information

Mortar Board Stands

SKU: 215677,215678,215679,215680,215681,215682

Safety Advice

Ensure you have read and fully understood the instruction manual and safety advice before using this product.

Always place mortar board stands on a flat, stable, and level surface to prevent collapse or instability.
Do not overload the stands with weight beyond the specified maximum capacity stated in the instruction manual.
Inspect each stand thoroughly before use to ensure no visible signs of damage, weakness, or instability
When positioning stands, place them in low-traffic or restricted-access areas to minimise the risk of trip hazards.
Avoid modifying or adapting the stands in any way, as this may compromise structural integrity and void manufacturer liability
Follow all assembly and disassembly instructions carefully to ensure the product is used safely and as intended.
Use a two-person lift when moving or assembling heavier stands to reduce the risk of manual handling injuries.
Do not use the stands for any purpose other than their intended use of supporting mortar boards during construction or similar applications.
Store stands in a dry, secure area when not in use to prevent damage and reduce the risk of unauthorised use.

Monster Group UK Limited’s liability will be limited to the commercial value of the product only.

Please visit https://monstershop.co.uk/policies/terms-of-service to see the full terms and conditions.

Materials

1.
Place the smaller stand frame into the gap of the larger frame.

Arrange so the frames make a cross shape.

Line up the holes on both of the frames.

On the top fitting place the U-Shaped Lock over the hole before inserting the Bolt and securing underneath with the Wing Nut.

For the bottom fitting place the Bolt into the hole and then secure underneath using the Wing Nut.
2. Maintenance
Regularly tighten any loose fixings and inspect joints or fasteners for signs of fatigue or loosening

To clean the stands, use a damp cloth with mild detergent and warm water to wipe all surfaces; ensure all cleaning residue is removed and surfaces are dry before reuse.
3. Troubleshooting
WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?

If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.

FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.

monstershop.co.uk
Instructions by Monstershop Mortar Board Stands
Monstershop / Mortar Board Stands Instructions by monstershop Mortar Board Stands 215677-215682 Product Information Mortar Board Stands SKU 215677,215678,215679,215680,215681,215682 Safety Advice Ensure you have read and fully understood the instruction manual and safety advice before using this product. Always place mortar board stands on a flat, stable, and level surface to prevent collapse or instability. Do not overload the stands with weight beyond the specified maximum capacity stated in the instruction manual. Inspect each stand thoroughly before use to ensure no visible signs of damage, weakness, or instability When positioning stands, place them in low-traffic or restricted-access areas to minimise the risk of trip hazards. Avoid modifying or adapting the stands in any way, as this may compromise structural integrity and void manufacturer liability Follow all assembly and disassembly instructions carefully to ensure the product is used safely and as intended. Use a two-person lift when moving or assembling heavier stands to reduce the risk of manual handling injuries. Do not use the stands for any purpose other than their intended use of supporting mortar boards during construction or similar applications. Store stands in a dry, secure area when not in use to prevent damage and reduce the risk of unauthorised use. Monster Group UK Limited’s liability will be limited to the commercial value of the product only. Please visit https://monstershop.co.uk/policies/terms-of-service to see the full terms and conditions. Materials 1. Place the smaller stand frame into the gap of the larger frame. Arrange so the frames make a cross shape. Line up the holes on both of the frames. On the top fitting place the U-Shaped Lock over the hole before inserting the Bolt and securing underneath with the Wing Nut. For the bottom fitting place the Bolt into the hole and then secure underneath using the Wing Nut. 2. Maintenance Regularly tighten any loose fixings and inspect joints or fasteners for signs of fatigue or loosening To clean the stands, use a damp cloth with mild detergent and warm water to wipe all surfaces; ensure all cleaning residue is removed and surfaces are dry before reuse. 3. Troubleshooting WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER? If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt. FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM. Monstershop website Terms Privacy

Product Information

Mortar Board Stands

Materials

1.

2. Maintenance

3. Troubleshooting